The action of KeraSage Serum Care for eyelashes and eyebrows Product 3:
– provides intensive care, nourishment and moisturising of eyelashes and eyebrows thanks to a complex of proteins (vegan and wheat);
– ceramides help to strengthen hairs and restore their hydro-lipid balance;
– trehalose and jojoba oil protect and have an antioxidant effect;
– can be used to minimise the darkening of eyebrow hairs before the colouring procedure.
For eyebrows: after applying Product 2, apply Product 3 to the cleansed eyebrow area, spread evenly. Leave until completely absorbed. No need to rinse off.
For eyelashes: after applying Product 2 (or a mixture of Product 2 and KeraTint), apply Product 3 to the eyelashes and distribute evenly. Leave until completely absorbed. Does not require
rinsing off.
STAGES OF THE EYEBROW LAMINATION PROCEDURE
1) Diagnosing the condition of the client’s eyebrow hairs
Determine the exposure time of KeraSoft Serum Lift for Eyelashes and Brows Tool 1 according to the points below:
1st group: eyebrow hairs are thick, hard, coarse, not previously treated with chemicals (dyeing procedures, lightening) exposure time 8-10 minutes;
group 2: eyebrow hairs of medium thickness, natural, healthy or previously treated with chemicals (dyeing, lightening procedures) – exposure time – 5-7 minutes;
IMPORTANT! For eyebrow lamination, use only KeraSoft Serum Lift for Eyelashes and Eyebrows Tool 1.
IMPORTANT! The maximum exposure time of KeraSoft Serum Lift for Eyelashes and Eyebrows Tool 1 is 10 minutes.
IMPORTANT! The air temperature in the room has a direct proportional effect on the activity of the product: the higher the temperature, the higher the reaction rate.
The exposure time of KeraBoost Serum Fixative for Eyelashes and Brows, Product 2 is 7 minutes and does not depend on the condition of the client’s eyebrow hairs and the exposure time of KeraSoft Serum Lift for Eyelashes and Brows, Product 1.
2) Preparation for the eyebrow lamination procedure
Use ELAN DETOX MUSH to cleanse the hairs and skin before the eyebrow lamination procedure. Remove the foam with a cotton pad moistened with water.
3) Shaping the eyebrows – KeraSoft Serum-lifting for eyelashes and eyebrows, 1
IMPORTANT! If the client has thin and sensitive skin, apply ELAN SKIN PROTECTOR Argan Oil Protective Cream to the eyebrows (thin layer) and to the skin around the eyebrows (thick layer).
IMPORTANT! If the client has sensitive skin and thin eyebrow hairs, in addition to applying ELAN SKIN PROTECTOR, add 1 drop of KegaCare Serum Eyebrow Care 3 to KeraSoft Serum Eyebrow Lift 1 and mix thoroughly before applying to the eyebrows.
3.1 Apply KeraSoft Serum Lift for Eyelashes and Brows Tool 1 to the eyebrows. The exposure time is 5-10 minutes.
IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.
3.2 After the exposure time has expired, remove the product residue with a cotton pad moistened with water.
IMPORTANT! At the stage of creating the eyebrow shape, it is important to take into account the direction of hair growth of the client. The changes should be smooth to avoid creases.
4) Fixing the direction of the eyebrow hairs – KeraBoost Serum fixative for eyelashes and eyebrows product 2
IMPORTANT! If the client has thin and sensitive skin, apply ELAN SKIN PROTECTOR Argan Oil Protective Cream to the eyebrows (thin layer) and to the skin around the eyebrows (thick layer).
4.1 Apply KeraBoost Serum Fixative for Eyelashes and Brows Product 2 to the eyebrows and spread it over the entire surface, gently arranging the hairs in the desired direction. The exposure time is 7 minutes.
4.2 After the exposure time is over, remove the product residues with a cotton pad moistened with water or ELAN DETOX MUSH. If using mousse, remove the foam with a cotton pad moistened with water.
5) Care for eyebrow hairs – KeraCare Serum care for eyelashes and eyebrows 3
After applying KeraBoost Serum Lash and Brow Fixer 2 or brow colouring procedure, apply KeraCare Serum Lash and Brow Care 3 to the previously cleansed brow area and spread evenly. Leave until completely absorbed. The product does not need to be washed off.
IMPORTANT! If after the lamination procedure you plan to carry out the eyebrow colouring procedure, apply KeraCare Serum Care for Lashes and Eyebrows Treatment 3 after applying ELAN COLOUR FIX colour fixing fluid.
IMPORTANT! If you are planning to colour your eyebrows after the lamination procedure, apply KeraCare Serum Care for Lashes and Eyebrows Treatment 3 as a care product after the colouring procedure.
IMPORTANT! If you are planning to colour your eyebrows after the lamination procedure, apply KeraCare Serum Eyebrow Care 3 as a treatment to minimise the darkening of the eyebrow hairs before the colouring procedure.
IMPORTANT! Eyebrow correction is performed only after the lamination procedure. It is recommended to perform the correction with tweezers to minimise skin damage.
STAGES OF THE EYELASH LIFTING PROCEDURE
1) Diagnostics of the client’s eyelashes
Determine the exposure time and the type of KeraSoft product – KeraSoft Serum Lash and Brow Lift Tool 1 or KeraSoft Serum Lash Lift Tool 1 – according to the points below:
Group 1: eyelash hairs are thick and even, not previously treated with chemicals (lifting, dyeing, lightening procedures) – KeraSoft Serum Lift for Lashes Tool 1, exposure time – 8-10 minutes;
2nd group: eyelash hairs of medium thickness or thin, not previously treated with chemicals (lifting, dyeing, lightening procedures) – KeraSoft Serum Lift for eyelashes Tool 1, exposure time – 5-7 minutes;
Group 3: eyelash hairs of medium thickness, previously treated with chemicals (lifting, dyeing, lightening procedures) – KeraSoft Serum Lift for eyelashes and eyebrows, Product 1, exposure time – 8-10 minutes;
Group 4: thin eyelash hairs, previously treated with chemicals (lifting, dyeing, lightening procedures) – KeraSoft Serum Lift for eyelashes and eyebrows, Product 1, exposure time – 5-7 minutes.
IMPORTANT! The maximum exposure time for KeraSoft Serum Lift for Eyelashes and Eyebrows Tool 1 or KeraSoft Serum Lift for Eyelashes Tool 1 is 10 minutes.
IMPORTANT! The air temperature in the room directly affects the activity of both products – the higher the temperature, the faster the reaction.
The exposure time of KeraBoost Serum Lash and Brow Fixer 2 is 7 minutes and does not depend on the condition of the client’s eyelash hairs and the exposure time of KeraSoft Serum Lash and Brow Lift 1 or KeraSoft Serum Lash and Brow Lift 1.
2) Preparation for the eyelash lifting procedure
2.1 Use ELAN DETOX MUSH to cleanse the hairs before the eyelash lifting procedure. Remove the foam with a cotton pad moistened with water.
2.2 Fix the silicone roller of the required size on the upper eyelid.
2.3 Distribute and fix the eyelashes on the roller with the help of TM ELAN professional line Lash Laminating Gel and the applicator.
3) Formation of the eyelash curl – KeraSoft Serum Lift for lashes and eyebrows Tool 1 or KeraSoft Serum Lift for lashes Tool 1
3.1 Apply KeraSoft Tool 1 to the area of eyelash curl formation. The exposure time is 5-10 minutes.
IMPORTANT! The exposure time and type of the product (KeraSoft Serum Lift for Lashes and Eyebrows Tool 1 or KeraSoft Serum Lift for Lashes Tool 1) should correspond to the specified for the selected group of hairs.
3.2 After the exposure time has expired, remove the product residues first with a dry brush in the direction of eyelash hair growth, and then with a microbrush or cotton swab moistened with water.
4) Fixing the direction of the eyelash hairs – KeraBoost Serum Fixer for lashes and eyebrows Product 2
4.1 Fixing the direction of the eyelash hairs without colouring
4.1.1 Apply KeraBoost Serum Fixer for Lashes and Eyebrows, Product 2 to the entire lash area in a thick layer. The exposure time is 7 minutes.
4.1.2 After the exposure time has expired, remove the remnants of the product first with a dry brush in the direction of eyelash hair growth, and then with a microbrush or cotton swab moistened with water or ELAN DETOX MUSH. If using a mousse, remove the foam with a cotton pad moistened with water.
4.2 Fixing the direction of the lash hairs with colouring on the roller – KeraBoost Serum Fixer for lashes and eyebrows Tool 2 + KeraTint Mascara
4.2.1 Mix KeraTint Mascara and KeraBoost Serum Fixer for Lashes and Brows Tool 2 in a non-metallic container in a 1:2 ratio.
IMPORTANT! The colour of the colour in the bottle may vary from light brown to black as a result of the product coming into contact with air after opening the package. This is normal for the colourants in the composition and does not affect the result of eyelash colouring at all.
4.2.2 Apply the mixture to the entire eyelash area in a thick layer. The exposure time is 7 minutes.
4.2.3 After the exposure time has expired, remove the remnants of the mixture first with a dry brush in the direction of eyelash growth, and then with a microbrush or cotton swab moistened with water or ELAN DETOX MUSH. If using mousse, remove the foam with a cotton pad moistened with water.
4.2.4 To fix the result after the colouring procedure, apply ELAN COLOUR FIX colour fixing fluid to the eyelashes.
5) Care for eyelash hairs – KeraBeauty Serum Care for eyelashes and eyebrows Product 3
5.1 After applying KeraBoost Serum Lash & Brow Fixer 2 or KeraTint Mascara + Serum Lash & Brow Fixer 2, apply a small amount of KeraSage Serum Lash & Brow Care 3 to previously cleaned lashes and spread evenly. Leave until completely absorbed. The product does not require rinsing.
RECOMMENDATIONS AFTER THE PROCEDURE OF EYELASH LIFTING AND EYEBROW LAMINATION
! It is not recommended to carry out the procedure of henna eyebrow dyeing or perform the procedure of eyebrow lightening, as the result can be extremely unpredictable: the structure of the hairs may be disturbed (dry hairs without shine), which can lead to their fragility and loss.
! For 24 hours after the procedure, do not go to baths, saunas, and solariums, do not mechanically disturb the shape of the eyebrows and the shape of the eyelash curl (sleeping with your face in a pillow), and do not comb your eyebrows and eyelashes.
! Within 48 hours after the procedure, avoid exposure of eyebrows and eyelashes to aggressive cosmetic products and procedures (scrubs, peels, lotions containing alcohol, laser procedures).
RESTRICTIONS ON EYELASH LIFTING AND BROW LAMINATION PROCEDURES
Absolute restrictions are individual sensitivity to the components in the products, any skin damage in the eyebrow and eye area, redness, rashes of any etiology, allergic reactions, as well as visiting the solarium, laser procedures 24 hours before eyelash lifting and/or eyebrow lamination.
PRECAUTIONARY MEASURES
KeraSoft contains thioglycolate and ammonia, KeraBoost contains hydrogen peroxide, KeraTint contains phenylenediamines, phenylenediamines (toluene diamines), resorcinol. The products may cause an allergic reaction. An allergy test should be performed before use: apply 2 drops of each product to a small area of the skin of the elbow bend 48 hours before use. If there is no redness, swelling or irritation on the skin, you can start the procedure.
For professional use only. Read and follow the instructions for use. Wear protective gloves. For external use only. Do not use metal objects when working with the products. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. In case of an allergic reaction, consult a dermatologist.
KeraTint is not intended for use by persons under the age of 16. Temporary black henna tattooing may increase the risk of allergies. Do not use the ink if you have
– a rash on your face or a sensitive, irritated or damaged scalp;
You have already had any reaction after dyeing your hair or eyelashes;
– had a reaction to a temporary black henna tattoo in the past.
Country of origin – Turkey
Volume – 10 ml
Expiration date: 24 months
Shelf life after opening: 6 months
Reviews
There are no reviews yet.